SKC旋风采样器是一个轻量级的导电塑料单位持有的集合在一个可重复使用的磁带在采样滤波器。它是专为切割点在5µM 50%,速度为:1.9升/分钟和4µm在2.2升/分钟。
SKC旋风采样器
旋风采样器是专为粉尘(气溶胶)抽样呼吸公约中定义的标准en481:1993,使用14 / 3“HSE方法分为一般方法和重采样,分析的吸入和可吸入尘“。
SKC旋风采样器是高度推荐的获得和读取文件中的14/3,进行任何使用旋风采样器在采样。
设计流量为2.2升/分钟,在4μm(微米)的颗粒大小,给出了一个50%的采样效率(切点)
美国SKC的塑料旋风从导电塑料消耗周围大气制造的电荷,防止静电干扰尘埃粒子的收集。
保持在一个可重复使用的塑料盒,这是提供完整的金属过滤器支持
网格和密封夹,以防止样品在运输过程中的实验室分析污染。
有关空气取样的详细说明,特别是旋风采样器的使用。
订货号:
Description | Pack Size | Part Number |
Cyclone cassette 25 mm for use with 225-69 | Each | 225-62 |
Cyclone cassette 37 mm for use with 225-69-37 | Each | 225-62-37 |
Rubber grit pots | 10 | 225-64 |
Stainless steel grids without tab 25 mm for use with 225-69 | 10 | 225-66 |
Stainless steel grids without tab 37 mm for use with 225-69-37 | 10 | 225-66-37 |
Filter transport cassette 25 mm | Each | 225-67 |
DPM plastic cyclone 37 mm | Each | 225-68 |
Plastic cyclone with 25 mm plastic cassette (runs at 2.2 L/min) | Each | 225-69 |
Plastic cyclone with 37 mm plastic cassette (runs at 2.2 L/min) | Each | 225-69-37 |
O-rings for Plastic Cyclone (set of 3) | Each | P22569 |
DPM cassette with 0.8 µm impactor | 10 | 225-317 |
Without impactor, standard 3-piece clear styrene cassette loaded with 37 mm heat-treated quartz filter, support pad, banded, meets NIOSH 5040 specifications | 50 | 225-401 |
GS-3 Multi-inlet Cyclone with bowl adapter, cassette adapter, and grit pot 37 mm | Each | 225-100 |
GS-3 Multi-inlet Cyclone with bowl adapter, cassette adapter, and grit pot 25 mm | Each | 225-103 |
GS-1 Single-inlet Cyclone includes bowl adapter, 37 mm cassette adapter, and grit pot | Each | 225-105 |
Replacement Cassette Adapter, for GS-3 and GS-1 Cyclones 25 mm | Each | 225-101 |
Replacement Cassette Adapter, for GS-3 and GS-1 Cyclones 37 mm | Each | 225-102 |
Three-piece Filter Cassette Blanks 37 mm | 10 | 225-3LF |
Three-piece Filter Cassette Blanks 25 mm | 50 | 225-3-25LF |
Filter Cassette/Cyclone Holder includes: 3 feet of 1/4 inch ID Tygon tubing and a 25 mm adapter ring, for attaching a DPM or standard filter cassette to a worker's clothing in the breathing zone. May be used with or without a cyclone, required when using the GS-1 Cyclone with the DPM Cassette | Each | 225-1 |
Replacement grit pots for use with GS1 and GS3 cyclones | 25 | P225012 |
Standard-size Multi-purpose Calibration Jar | Each | 225-111 |
25 mm Respirable Dust Aluminum Cyclone, with grit pot. Three-piece cassettes are required for use with SKC Aluminum Cyclones | Each | 225-01-01 |
37 mm Respirable Dust Aluminum Cyclone, with grit pot. Three-piece cassettes are required for use with SKC Aluminum Cyclones. | Each | 225-01-02 |
Calibration Chamber, for 25 and 37 mm cyclones | Each | 225-01-03 |
Replacement Grit Pot for Aluminium Cyclones | 25 | P225011 |