全国统一热线:021-31265669
产品中心您的位置:网站首页 > 产品中心 > 德尔格压缩空气质量检测仪 > 德尔格压缩空气检测仪 > 6527149德尔格压缩空气质量检测仪
德尔格压缩空气质量检测仪

德尔格压缩空气质量检测仪

简要描述:

德国德尔格公司是Z大的压缩空气质量检测仪厂家,德尔格压缩空气质量检测仪为中国GMP认证指南含油水检测推荐产品!其中款为AEROTEST ALPHA,主机订货号6527149,套装订货号为6527150,上海京工为德国德尔格签约一级代理,并且是2010版GMP认证标准单位!德尔格压缩空气检测仪以及常用耗材大量现货,货源新鲜,欢迎新老客户选购!

打印当前页

免费咨询:021-31265669

发邮件给我们:m975@163.com

分享到:

德尔格压缩空气质量检测仪

(AEROTEST ALPHA主机6527149)

德尔格公司是著名的安全设备与医疗设备生产厂家,德尔格在氧气呼吸器与空气呼吸器领域是的。德尔格压缩空气质量检测仪zui早是为了满足欧盟呼吸压缩空气EN12021而产生,主要用于快速检测压缩空气中的油、水、CO、CO2的含量。目前广泛用于检测工厂管道压缩空气,用于GMP认证中对于压缩空气品质的监测。检测压缩空气中的管道的油、水对于减少产品中的微生物有及其重要意义。

<strong><strong><strong><strong><strong><strong><strong><strong></strong></strong></strong></strong></strong></strong></strong></strong>测量通道

AEROTEST ALPHA Features:

  • Dimensions of Carrying Case (L x W x H): 35 cm x 30 cm x 8.5 cm
  • Weight (including contents): approx. 6.6 lbs. (3.0 kg)
  • Max. Supply Pressure: 15 bar (217 psi)
  • Pressure Gauge: 0.3 to 15 bar (4.35 - 217 psi)
  • Connection for Compresses Air Supply (barbed nipple): 0.9 cm
  • Supply Pressure (set on delivery): 3.0 bar (43.5 psi)
  • Flow Rate: 0.2 and 4.0 l/min.

首先,压缩空气品质的检测在制药行业是必须的!!!
压缩气体是药品生产中的一个主要动力源,它贯穿于发酵、结晶、干燥、过滤等流程之中。常用的压缩空气有 两种:一种为一般性润滑油压缩机系统,供仪表的气动元 件所用,不与药品直接接触;一种为无油压缩空气系统, 是与药品生产直接接触的,由于与药品生产直接接触的压 缩空气的品质直接影响了产品质量的好坏,因此日常药品 生产企业使用zui多的还是无油压缩系统。
2010版GMP认证对压缩空气含油、水(露点)的要求:
含油:<0.1 mg/m³;含水:<-40Td (℃)对应湿度为100mg/m³
(对应ISO8573 与GB13277的压缩空气二级标准)

检测油雾zui低可达0.1mg/m3,符合国标二级,含水量为20-1500mg/m3,简单经济,可靠性高!常规型号为Aerotest Alpha,压力范围3-15bar,绝大多数药企的气源压力均在此范围内,使用方便!

Aerotest 用于检测压缩空气的质量。 根据适当的净化标准,可以定量分析压缩空气中的 污染物,例如CO、CO2、H2 O、Oil等,并可单独或同时确定这些有害物质的浓度。

Aerotest Alpha主机配置:

-1个手动减压器(3-15巴)

-1个可同时安装4支检测管的流量调节器

-1个计时器

-1个开管器

-1个油盒适配器

-1个手提箱

-1份培训光盘

-1个气泡导管

-1份原厂校验报告

-2个转接头(上海京工另送国产Φ8软管快接头)

-2本使用手册等

压缩空气检测仪

压缩空气检测仪测量油雾的原理:

压缩空气通过20 个小孔引导入impactor垂直至刻花玻璃传感平台。进入impactor 后空气90º改变方向在玻璃界面上根据高度惯性分离空气中的油雾物质。玻璃中的凹进处填满了油导致玻璃磨擦的光线分散被补偿。这种原理允许视觉辨认微小质量的油雾。由于孔口的特殊安排,分离油的质量而因此如果空气的质量已知油雾的浓度可以以很高的重复性进行测量。

压缩空气质量检测仪现场检测

For the purity measurement of breathing air in the low-pressure range, the Dräger Aerotest Alpha offers top quality. Using the Dräger Aerotest Alpha, it is possible to determine the quality of the breathing air which is supplied by a compressor or a compressed gas cylinder. By means of the test system, the reliable testing of the breathing air is ensured according to the applicable classification EN 12021.

When using the Dräger Aerotest Alpha, it is possible to reliably determine different potential pollutants such as carbon monoxide, carbon dioxide, hydro steam or oil in the compressed air flow. Optionally, the values can be determined simultaneously or individually.

Using the plug connection, the measuring device, which can be used independently of power supplies, can be connected to the low-pressure compressed air supply system to be monitored easily and without problems. In just five minutes, the quick check delivers a precise measurement result and shows the degree of the contamination.

The new Dräger Oil Impactor was developed especially for the testing and checking of compressed air for oil aerosols. Apart from common and conventional oils, even synthetic oils can now be measured without problems – independent of their kind or viscosity – for the first time. A wide measuring range with scaling ensures the precise reading of accurate values.

上一篇 : HI8424微电脑酸度pH测定仪    下一篇 :  TIF5750A SF6检漏仪
COPYRIGHT @ 2016 上海京工实业有限公司(www.king17.cn)主营:德尔格压缩空气检测仪,加拿大BW四合一气体检测仪,华瑞VOC气体检测仪,美国SKC采样器,匹磁在线溶氧仪,自增压液氮灌,GE德鲁克,哈希浊度仪,德尔格气体检测仪,美国TIF
网站地图    沪ICP备09035104号-9    关于我们 新闻中心 资料下载 产品中心 联系我们 管理登陆

地址:上海市西闸支路107号2-3层