德尔格pac3500

德尔格pac3500

德国德尔格Drager Pac3500测量准确，操作简单,是理想的个人防护气体检测报警仪。此仪器可以快速连续检测环境空气中的一氧化碳，硫化氢或氧气的浓度并及时报警，使用寿命2年，专为工业安全应用设计。

（现货）技术参数：

功能测试快速可靠

功能测试可以检查仪器是否工作正常。绝大多数国家规范要求用户利用已知浓度气体对仪器进行常规测试。功能测试可以检查仪器是否正常工作。德尔格Pac 3500满足不同的应用配置了可调节功能测试和标定间隔，到功能测试和标定要求日期屏幕上会自动显示警告。如若忽略警告，仪器可自动显示“出现故障”错误信息。用户也可以选择对标定间隔过期设置此错误信息提示。德尔格Pac 3500可以与德尔格功能测试仪配套使用，每次仅8到15秒即可快速简单地完成测试。此经济型设备无须电源，可任何地点检查仪器和传感器。每次成功的测试都自动记录在数据存储器中同时失败的测试会提示仪器“出现故障”。还可选配便携式打印机和打印文本结果。开机后可以简单进行新鲜空气标定。所有其它标定菜单选项均有密码保护。

QUICK AND RELIABLE BUMP TESTING

Bump or function tests are necessary to check if the instruments are functioning correctly. Most national regulations require users to test equipment against a known gas concentration on a regular basis. Featuring adjustable bump test and calibration intervals, the Dräger Pac 3500 alerts the user when bump tests or calibration are required. If this warning is ignored or a test is unsuccessful, the instrument automatically displays an “out of order” error message. Performed together with the Dräger Bump Test Station, a typical bump test takes between 8 and 15 seconds and requires no additional power so that the test can be performed on site. Each test result is automatically stored in the event logger and, should hard copies be required, an optional printer can be used. If necessary, a fresh air calibration can be carried out during the start-up sequence. All other calibration options are only accessible via a password-protected menu.

升级款pac5500检测气体量程：

Pac 5500 CO （EU） 0 to 500 ppm

Pac 5500 H2S （EU） 0 to 100 ppm

Pac 5500 O2 （EU） 0 to 25 Vol.%

更多德尔格气体检测仪详细资料介绍：www.king17。。ｃｎ